# 8BIT News
**URL:** https://forum.makecode.com/t/8bit-news/27842
**Category:** Arcade
**Created:** [March 20, 2024, 5:51pm UTC](https://forum.makecode.com/t/8bit-news/27842 "2024-03-20T17:51:11Z")
**Posts on this page:** 20
**Page:** 5
### Author:  [@Josef](https://forum.makecode.com/u/Josef)
#### Post date: [March 25, 2025, 6:23am UTC](https://forum.makecode.com/t/8bit-news/27842/84 "2025-03-25T06:23:19Z")
yeah were halfway done on it
---
### Author:  [@Josef](https://forum.makecode.com/u/Josef)
#### Post date: [March 25, 2025, 6:23am UTC](https://forum.makecode.com/t/8bit-news/27842/85 "2025-03-25T06:23:21Z")
oh. ok have fun
---
### Author:  [@Danny\_Devention](https://forum.makecode.com/u/Danny_Devention)
#### Post date: [March 25, 2025, 6:25am UTC](https://forum.makecode.com/t/8bit-news/27842/86 "2025-03-25T06:25:48Z")
All jokes aside it would be cool if they made a 32bit version of makecode better at 3D stuff and more targeted towards pro coders, or “big kids” so to speak.
…@richard…your thoughts?
---
### Author:  [@Danny\_Devention](https://forum.makecode.com/u/Danny_Devention)
#### Post date: [March 25, 2025, 6:25am UTC](https://forum.makecode.com/t/8bit-news/27842/87 "2025-03-25T06:25:53Z")
Oh ok!
…
…so I can theoretically emulate it on new 3ds models…if I figure out how!
(evil laugh)
---
### Author:  [@Brohann](https://forum.makecode.com/u/Brohann)
#### Post date: [March 25, 2025, 12:55pm UTC](https://forum.makecode.com/t/8bit-news/27842/88 "2025-03-25T12:55:18Z")
> [@RobbyZero](#):
>
> MakeCode is 16 bit just so you guys know
?
Computers that run makecode are 32 or 64 bit, and hardware is usually 32 bit.
---
### Author:  [@Sonicblaston](https://forum.makecode.com/u/Sonicblaston)
#### Post date: [March 25, 2025, 1:03pm UTC](https://forum.makecode.com/t/8bit-news/27842/89 "2025-03-25T13:03:41Z")
Tried it and failed already bud
---
### Author:  [@Danny\_Devention](https://forum.makecode.com/u/Danny_Devention)
#### Post date: [March 25, 2025, 5:43pm UTC](https://forum.makecode.com/t/8bit-news/27842/90 "2025-03-25T17:43:31Z")
I WAS RIGHT!!! hahah!
…not that it mattered or anything…but yeah
---
### Author:  [@Danny\_Devention](https://forum.makecode.com/u/Danny_Devention)
#### Post date: [March 25, 2025, 8:41pm UTC](https://forum.makecode.com/t/8bit-news/27842/91 "2025-03-25T20:41:08Z")
Dag Nabbit
What method did u use?
---
### Author:  [@MeatballDev](https://forum.makecode.com/u/MeatballDev)
#### Post date: [March 25, 2025, 8:41pm UTC](https://forum.makecode.com/t/8bit-news/27842/92 "2025-03-25T20:41:09Z")
please take the conversation elsewhere
---
### Author:  [@RobbyZero](https://forum.makecode.com/u/RobbyZero)
#### Post date: [March 25, 2025, 8:41pm UTC](https://forum.makecode.com/t/8bit-news/27842/93 "2025-03-25T20:41:10Z")
I mean it’s based off of 16 bit systems
---
### Author:  [@Sonicblaston](https://forum.makecode.com/u/Sonicblaston)
#### Post date: [March 25, 2025, 8:41pm UTC](https://forum.makecode.com/t/8bit-news/27842/94 "2025-03-25T20:41:11Z")
Huh? But it sounded that you wanted 32 bit but didn’t have it. Makecode itself is 32 bit but the sceen/amount of colors is 4bit
---
### Author:  [@Josef](https://forum.makecode.com/u/Josef)
#### Post date: [March 26, 2025, 4:55pm UTC](https://forum.makecode.com/t/8bit-news/27842/95 "2025-03-26T16:55:55Z")
ok where? at the bus stop?
---
### Author:  [@Danny\_Devention](https://forum.makecode.com/u/Danny_Devention)
#### Post date: [March 26, 2025, 4:56pm UTC](https://forum.makecode.com/t/8bit-news/27842/96 "2025-03-26T16:56:28Z")
I dunno, I’m kinda lost at this point. Let’s move this whole 32bit makecode thing to the new topic I made
---
### Author:  [@MeatballDev](https://forum.makecode.com/u/MeatballDev)
#### Post date: [March 26, 2025, 9:32pm UTC](https://forum.makecode.com/t/8bit-news/27842/97 "2025-03-26T21:32:28Z")
that is mean, but to answer the question, somewhere that doesnt notify my whenever you post
---
### Author:  [@\_jupiter](https://forum.makecode.com/u/_jupiter)
#### Post date: [March 27, 2025, 10:24pm UTC](https://forum.makecode.com/t/8bit-news/27842/98 "2025-03-27T22:24:46Z")
ok but for real @Josef its time to stop. You’re the only one in staff dragging this on right now.
---
### Author:  [@Josef](https://forum.makecode.com/u/Josef)
#### Post date: [March 27, 2025, 10:27pm UTC](https://forum.makecode.com/t/8bit-news/27842/99 "2025-03-27T22:27:48Z")
It was a joke I understand but how would we move a convo
---
### Author:  [@MeatballDev](https://forum.makecode.com/u/MeatballDev)
#### Post date: [March 27, 2025, 10:27pm UTC](https://forum.makecode.com/t/8bit-news/27842/100 "2025-03-27T22:27:51Z")
Stop taking sides, 8bit news provides a completely unbiased side of the story, we do extensive research, thank you for the question @Archer_Bright
---
### Author:  [@Josef](https://forum.makecode.com/u/Josef)
#### Post date: [March 28, 2025, 5:16pm UTC](https://forum.makecode.com/t/8bit-news/27842/101 "2025-03-28T17:16:49Z")
well it was a qoute and channel 0 has a team so i recomend you recruit ppl so there are more frequent articles. i rllly wanna see 8BIT news’s top potential
---
### Author:  [@Josef](https://forum.makecode.com/u/Josef)
#### Post date: [March 28, 2025, 5:16pm UTC](https://forum.makecode.com/t/8bit-news/27842/102 "2025-03-28T17:16:52Z")
ok sure…i was just tryna go full on duolingo marketing 💀
---
### Author:  [@Archer\_Bright](https://forum.makecode.com/u/Archer_Bright)
#### Post date: [March 28, 2025, 5:17pm UTC](https://forum.makecode.com/t/8bit-news/27842/103 "2025-03-28T17:17:12Z")
Thank you. Why is everyone competing to get a news story out anyways? While i am a part of Channel 0, there is no reason we should be competing to get a story out. We should just rejoice that we got a new Update.
[Previous page](https://forum.makecode.com/t/8bit-news/27842.md?page=4)
[Next page](https://forum.makecode.com/t/8bit-news/27842.md?page=6)