# Advice on ordering hardware for Arcade in Spring 2020

**URL:** <https://forum.makecode.com/t/advice-on-ordering-hardware-for-arcade-in-spring-2020/1395>\
**Category:** Help\
**Tags:** make\
**Created:** [March 13, 2020, 10:24am UTC](https://forum.makecode.com/t/advice-on-ordering-hardware-for-arcade-in-spring-2020/1395 "2020-03-13T10:24:21Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![richard](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/richard/32/5417_2.png) [@richard](https://forum.makecode.com/u/richard)\
**Post date:** [March 13, 2020, 5:04pm UTC](https://forum.makecode.com/t/advice-on-ordering-hardware-for-arcade-in-spring-2020/1395/3 "2020-03-13T17:04:54Z")

</div>

If you are trying to connect the arcade to an HDMI screen (like for a cabinet), you’ll need a raspberry pi. The Adafruit boards are for handhelds.

I believe we only support the Raspberry Pi zero (@mmoskal correct me if I’m wrong)

---

_[View the full topic](https://forum.makecode.com/t/advice-on-ordering-hardware-for-arcade-in-spring-2020/1395)._