# Camera

**URL:** <https://forum.makecode.com/t/camera/16043>\
**Category:** Help\
**Created:** [October 28, 2022, 1:30am UTC](https://forum.makecode.com/t/camera/16043 "2022-10-28T01:30:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![workerbob](https://avatars.discourse-cdn.com/v4/letter/w/4af34b/32.png) [@workerbob](https://forum.makecode.com/u/workerbob)\
**Post date:** [October 28, 2022, 1:30am UTC](https://forum.makecode.com/t/camera/16043/1 "2022-10-28T01:30:06Z")

</div>

[https://arcade.makecode.com/S27286-80718-22034-93440](https://arcade.makecode.com/S27286-80718-22034-93440), the camera doesn’t follow correctly, is it because of the sprite changes?

---

<div class="post-metadata">

**Author:** ![MakeCode](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@MakeCode](https://forum.makecode.com/u/MakeCode)\
**Post date:** [October 28, 2022, 1:30am UTC](https://forum.makecode.com/t/camera/16043/2 "2022-10-28T01:30:59Z")

</div>

Try adding  
 ![Screenshot by Dropbox Capture](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/3/3c2c8483fb066e7116a79d871a6ce129f127c230.png)

Then you should see it doing what you expect. Note that mySprite2 is going to stay relative to camera with the code you have, so it will always be in that lower left corner.