# Chatting Area! Have fun! (Part 1)
**URL:** https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740
**Category:** Show & Tell
**Created:** [June 14, 2021, 9:12pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740 "2021-06-14T21:12:05Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@DahbixLP](https://forum.makecode.com/u/DahbixLP)
#### Post date: [June 14, 2021, 9:12pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/1 "2021-06-14T21:12:05Z")
Hello! Have fun! Talk to eachother! Also non coding related! First I will show my PC Setup!(This is not to make anyone jelous! I just want to show people!)
I just think it looks too great not to share! Bc rn I can not show anybody else!
Before anybody gets jelous! Do not worry this whole setup was not expensive! (\>800$) Any dream can become true! The PC was not expensive and still runs 500+FPS on Minecraft! Feel free to post your setups!
Thanks and bye!
---
### Author:  [@XDlol](https://forum.makecode.com/u/XDlol)
#### Post date: [June 14, 2021, 10:11pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/2 "2021-06-14T22:11:25Z")
hi yall
---
### Author:  [@Agent\_14](https://forum.makecode.com/u/Agent_14)
#### Post date: [June 14, 2021, 10:12pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/3 "2021-06-14T22:12:30Z")
My “office” (normally it is really messy)
It is cheaper than it seems. Less than 900 and really powerful. The desk is a little too small for everything 🤣.
---
### Author:  [@DahbixLP](https://forum.makecode.com/u/DahbixLP)
#### Post date: [June 15, 2021, 9:27pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/4 "2021-06-15T21:27:41Z")
Wow looks great! RGB for life 😆! Nice 3D printer! Must be fun making things with it… but I know it takes some time!
---
### Author:  [@girlwhocode](https://forum.makecode.com/u/girlwhocode)
#### Post date: [June 15, 2021, 9:28pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/5 "2021-06-15T21:28:20Z")
I wish i could show mine but…it’s filled with papers so i have to clean first. 😅 📰
---
### Author:  [@UnsignedArduino](https://forum.makecode.com/u/UnsignedArduino)
#### Post date: [June 16, 2021, 12:42am UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/6 "2021-06-16T00:42:01Z")
> [@DahbixLP](#):
>
> Do not worry this whole setup was not expensive! (\>800$)
Over $800 dollars? 😆 (you meant “\<” right? or is it backward in Europe?)
---
### Author:  [@DahbixLP](https://forum.makecode.com/u/DahbixLP)
#### Post date: [June 16, 2021, 12:42am UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/7 "2021-06-16T00:42:03Z")
Don’t worry I also have a big mess sometimes…
---
### Author:  [@Agent\_14](https://forum.makecode.com/u/Agent_14)
#### Post date: [June 16, 2021, 1:49am UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/8 "2021-06-16T01:49:43Z")
I havent printed in a while cause I can’t get the first layer to stick ☹. I’ve tried everything, and it refuses to.
---
### Author:  [@girlwhocode](https://forum.makecode.com/u/girlwhocode)
#### Post date: [June 16, 2021, 4:03pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/9 "2021-06-16T16:03:32Z")
Oof…i can ask my teacher because she has 3D printer, so she might know how to fix this problem so i’ll ask her.
---
### Author:  [@Agent\_14](https://forum.makecode.com/u/Agent_14)
#### Post date: [June 16, 2021, 6:35pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/10 "2021-06-16T18:35:31Z")
Graduated! Let go! Next up, high school.
---
### Author:  [@ThunderDrop180](https://forum.makecode.com/u/ThunderDrop180)
#### Post date: [June 16, 2021, 6:36pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/11 "2021-06-16T18:36:12Z")
uhhhhhh i hope so.
> [@DahbixLP](#):
>
> Do not worry this whole setup was not expensive! (\>800$)
😅
---
### Author:  [@DahbixLP](https://forum.makecode.com/u/DahbixLP)
#### Post date: [June 16, 2021, 9:05pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/12 "2021-06-16T21:05:30Z")
Oops sorry of course I meant less that 800$…
---
### Author:  [@E-EnerG-Gamecentral](https://forum.makecode.com/u/E-EnerG-Gamecentral)
#### Post date: [June 16, 2021, 9:06pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/13 "2021-06-16T21:06:11Z")
hello! I have an idea- why don’t we do something like this :
Making Computer Models in Makecode Arcade!
---
### Author:  [@girlwhocode](https://forum.makecode.com/u/girlwhocode)
#### Post date: [June 16, 2021, 10:35pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/14 "2021-06-16T22:35:39Z")
Yasss queen! 💻 🖱
---
### Author:  [@Rocket\_Scion](https://forum.makecode.com/u/Rocket_Scion)
#### Post date: [June 17, 2021, 6:22am UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/15 "2021-06-17T06:22:07Z")
An Ender 3! Awesome! Me and my Dad share one!
We had a problem with stuff not sticking, and it was our magnetic plate had worn out. That’s easy to replace. If only part of the plate is a problem, you can print items on the less worn part of the plate for a while.
Also, for hard to print parts, we use Magigoo, a special glue for 3D printers.
---
### Author:  [@Agent\_14](https://forum.makecode.com/u/Agent_14)
#### Post date: [June 17, 2021, 6:22am UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/16 "2021-06-17T06:22:20Z")
It is not bed adhesion, not nozzle height, nor bed temp.
---
### Author:  [@Agent\_14](https://forum.makecode.com/u/Agent_14)
#### Post date: [June 17, 2021, 3:58pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/17 "2021-06-17T15:58:11Z")
Thanks for the tip! I’m using a glass bed now, but I’ll try using the glue!
---
### Author:  [@MopishCobra75](https://forum.makecode.com/u/MopishCobra75)
#### Post date: [June 21, 2021, 8:22pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/18 "2021-06-21T20:22:23Z")
Why did I get a notification about this? I didn’t talk here before this.
---
### Author:  [@UnsignedArduino](https://forum.makecode.com/u/UnsignedArduino)
#### Post date: [June 21, 2021, 9:37pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/19 "2021-06-21T21:37:06Z")
I think if you read it for over 5 minutes or something like that it will count…
---
### Author:  [@ursoidd](https://forum.makecode.com/u/ursoidd)
#### Post date: [June 25, 2021, 4:59pm UTC](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740/20 "2021-06-25T16:59:18Z")
my pc stup its just a laptop and a mouse 😐
[Next page](https://forum.makecode.com/t/chatting-area-have-fun-part-1/8740.md?page=2)