# Configuring online editor for micro:bit V1

**URL:** <https://forum.makecode.com/t/configuring-online-editor-for-micro-bit-v1/21489>\
**Category:** micro:bit\
**Created:** [July 25, 2023, 10:26pm UTC](https://forum.makecode.com/t/configuring-online-editor-for-micro-bit-v1/21489 "2023-07-25T22:26:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![daedalus](https://avatars.discourse-cdn.com/v4/letter/d/ee59a6/32.png) [@daedalus](https://forum.makecode.com/u/daedalus)\
**Post date:** [July 25, 2023, 10:26pm UTC](https://forum.makecode.com/t/configuring-online-editor-for-micro-bit-v1/21489/1 "2023-07-25T22:26:45Z")

</div>

Is there a way to tell the online makecode editor that i have a V1 microbit? (So it limits the available blocks to those that are compatible with the V1)

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![urassari](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/urassari/32/9535_2.png) [@urassari](https://forum.makecode.com/u/urassari)\
**Post date:** [July 28, 2023, 4:41pm UTC](https://forum.makecode.com/t/configuring-online-editor-for-micro-bit-v1/21489/2 "2023-07-28T16:41:41Z")

</div>

this isnt possible but it shows if blocks are only compatible with V2.  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/9/9e7945819f1ee95c61a1d75482fc9f8734445e33.png)

---

<div class="post-metadata">

**Author:** ![daedalus](https://avatars.discourse-cdn.com/v4/letter/d/ee59a6/32.png) [@daedalus](https://forum.makecode.com/u/daedalus)\
**Post date:** [July 28, 2023, 4:56pm UTC](https://forum.makecode.com/t/configuring-online-editor-for-micro-bit-v1/21489/3 "2023-07-28T16:56:27Z")

</div>

Thanks very much for the reply. That’s good to know.

Cheers,