# connecting the micro:bit to the expansion board and LED light

**URL:** https://forum.makecode.com/t/connecting-the-micro-bit-to-the-expansion-board-and-led-light/31572
**Category:** micro:bit
**Created:** [November 7, 2024, 10:28pm UTC](https://forum.makecode.com/t/connecting-the-micro-bit-to-the-expansion-board-and-led-light/31572 "2024-11-07T22:28:19Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![kathleenharris](https://avatars.discourse-cdn.com/v4/letter/k/c77e96/32.png) [@kathleenharris](https://forum.makecode.com/u/kathleenharris)
#### Post date: [November 7, 2024, 10:28pm UTC](https://forum.makecode.com/t/connecting-the-micro-bit-to-the-expansion-board-and-led-light/31572/1 "2024-11-07T22:28:19Z")

</div>

![Micro-bit DF Robot Voice Recognition](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/3X/2/1/21ceeb29139a0ac2426779b2d0f8dc6bb55a4d91.jpeg)

Hello! I connected a DF Robot Voice Recognition sensor to a micro:bit and expansion board. I am at the point where I need to know where to attach the wires from the digital LED module V2 to the expansion board. Once it is connected, I have questions about the code component.

Thank you!