# Creating your own Arcade hardware

**URL:** https://forum.makecode.com/t/creating-your-own-arcade-hardware/36010
**Category:** Arcade
**Created:** [April 21, 2025, 7:26pm UTC](https://forum.makecode.com/t/creating-your-own-arcade-hardware/36010 "2025-04-21T19:26:21Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![SerbynS](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/serbyns/32/21645_2.png) [@SerbynS](https://forum.makecode.com/u/SerbynS)
#### Post date: [April 21, 2025, 7:26pm UTC](https://forum.makecode.com/t/creating-your-own-arcade-hardware/36010/1 "2025-04-21T19:26:21Z")

</div>

Hello, I decided to create a console for MakeCode Arcade. Since I’m just starting to learn this craft, I found an official board from Microfost, ordered it, and soldered all the elements.

Now there is one problem: I can program via ST-Link, but when I connect the board directly to the PC, nothing happens.

If anyone can help or has any advice, I would be very grateful!