# Fuse projects? **URL:** https://forum.makecode.com/t/fuse-projects/20344 **Category:** Help **Created:** [June 1, 2023, 4:38pm UTC](https://forum.makecode.com/t/fuse-projects/20344 "2023-06-01T16:38:16Z") **Posts on this page:** 4 **Page:** 1
### Author: ![ChimbroDaPro](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/chimbrodapro/32/15852_2.png) [@ChimbroDaPro](https://forum.makecode.com/u/ChimbroDaPro) #### Post date: [June 1, 2023, 4:38pm UTC](https://forum.makecode.com/t/fuse-projects/20344/1 "2023-06-01T16:38:16Z")
Hi all! Is there a way to fuse projects together, without having to put in all the code again? Thanks in advance! ---
### Author: ![UnsignedArduino](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/unsignedarduino/32/592_2.png) [@UnsignedArduino](https://forum.makecode.com/u/UnsignedArduino) #### Post date: [June 1, 2023, 8:30pm UTC](https://forum.makecode.com/t/fuse-projects/20344/2 "2023-06-01T20:30:47Z")
No. You most likely want a custom bootloader that allows you to selectively load code from a specific address in flash, but that would probably be extremely difficult. ---
### Author: ![ChimbroDaPro](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/chimbrodapro/32/15852_2.png) [@ChimbroDaPro](https://forum.makecode.com/u/ChimbroDaPro) #### Post date: [June 1, 2023, 9:29pm UTC](https://forum.makecode.com/t/fuse-projects/20344/3 "2023-06-01T21:29:33Z")
Ok. Thanks!!! ---
### Author: ![Sarge](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/sarge/32/19590_2.png) [@Sarge](https://forum.makecode.com/u/Sarge) #### Post date: [June 1, 2023, 9:29pm UTC](https://forum.makecode.com/t/fuse-projects/20344/4 "2023-06-01T21:29:46Z")
If you mean that as in “merging” the project code, you can switch to JavaScript (make a backup first!) and copy all the code, convert the other project to JavaScript and paste the code there. Then just convert back to blocks.