# Help for micro bit

**URL:** <https://forum.makecode.com/t/help-for-micro-bit/39617>\
**Category:** Help\
**Created:** [October 3, 2025, 5:27pm UTC](https://forum.makecode.com/t/help-for-micro-bit/39617 "2025-10-03T17:27:00Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Buz123](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/buz123/32/25298_2.png) [@Buz123](https://forum.makecode.com/u/Buz123)\
**Post date:** [October 3, 2025, 5:27pm UTC](https://forum.makecode.com/t/help-for-micro-bit/39617/1 "2025-10-03T17:27:00Z")

</div>

HELP! My Micro-bit V2 servo won’t move and it is making a clicking sound. I attached it to the battery pack that came with the box. Could someone please help me? Thanks!

---

<div class="post-metadata">

**Author:** ![randomuser](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/randomuser/32/32505_2.png) [@randomuser](https://forum.makecode.com/u/randomuser)\
**Post date:** [October 6, 2025, 8:57pm UTC](https://forum.makecode.com/t/help-for-micro-bit/39617/2 "2025-10-06T20:57:02Z")

</div>

I’ve had this issue before! For me, it’s usually that the battery is dead/dying, or it’s not getting enough power in some other way (Like if the wire between the battery and the servo is worn out).  
I’d suggest replacing the battery as a first step to see if that works!

---

<div class="post-metadata">

**Author:** ![Buz123](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/buz123/32/25298_2.png) [@Buz123](https://forum.makecode.com/u/Buz123)\
**Post date:** [November 14, 2025, 5:43pm UTC](https://forum.makecode.com/t/help-for-micro-bit/39617/3 "2025-11-14T17:43:15Z")

</div>

I already tried replacing the battery; it didn’t work ☹

---

<div class="post-metadata">

**Author:** ![randomuser](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/randomuser/32/32505_2.png) [@randomuser](https://forum.makecode.com/u/randomuser)\
**Post date:** [November 21, 2025, 7:14pm UTC](https://forum.makecode.com/t/help-for-micro-bit/39617/4 "2025-11-21T19:14:54Z")

</div>

Hm… [this page has more troubleshooting suggestions for the servo,](https://support.microbit.org/support/solutions/articles/19000101864-using-a-servo-with-the-micro-bit#troubleshooting) maybe try tapping the servo arms to get it to start spinning, making sure the power and ground connections are correct, or double check you’re using the right blocks for a 180 degree or a 360 degree servo.