# Help with kiosk mode

**URL:** <https://forum.makecode.com/t/help-with-kiosk-mode/24637>\
**Category:** Help\
**Created:** [November 30, 2023, 5:13pm UTC](https://forum.makecode.com/t/help-with-kiosk-mode/24637 "2023-11-30T17:13:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SoftTalker](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/softtalker/32/10776_2.png) [@SoftTalker](https://forum.makecode.com/u/SoftTalker)\
**Post date:** [November 30, 2023, 5:13pm UTC](https://forum.makecode.com/t/help-with-kiosk-mode/24637/1 "2023-11-30T17:13:52Z")

</div>

@KIKIvsIT could u help me with building a kiosk using a rasberry pi 0 w?  
idk where to start

---

<div class="post-metadata">

**Author:** ![KIKIvsIT](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/kikivsit/32/10492_2.png) [@KIKIvsIT](https://forum.makecode.com/u/KIKIvsIT)\
**Post date:** [November 30, 2023, 6:52pm UTC](https://forum.makecode.com/t/help-with-kiosk-mode/24637/2 "2023-11-30T18:52:15Z")

</div>

Honestly, the easiest way to build a kiosk now is just to connect it to an internet page that’s showing [arcade.makecode.com/kiosk](http://arcade.makecode.com/kiosk). Since the raspberry pi 0 gets internet, once you have an operating system on it, you should be able to navigate to that page and display it like you would any computer. Then, hook it up to the monitor and buttons on your cabinet and you’ll be good to go!

Here are some pages that might help:  
[Cardboard Arcade Cabinet - DIY](https://1drv.ms/w/s!AqsgsTyHBmRBnW-Epjm-WdjDODKm?e=S7nxfP)

[Wooden Arcade Cabinet.docx](https://1drv.ms/w/s!AqsgsTyHBmRBnDsGKQqVKZ0dYw0t?e=zsnbst)

[Raspberry Pi Wooden Arcade Cabinet.docx](https://arcade.makecode.com/hardware/raspberry-pi/wooden-cabinet)