# Help with raspberry pi 0 download **URL:** \ **Category:** Help\ **Created:** [February 7, 2021, 9:28pm UTC](https://forum.makecode.com/t/help-with-raspberry-pi-0-download/6018 "2021-02-07T21:28:44Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![ggiscool](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/ggiscool/32/3431_2.png) [@ggiscool](https://forum.makecode.com/u/ggiscool)\ **Post date:** [February 7, 2021, 9:28pm UTC](https://forum.makecode.com/t/help-with-raspberry-pi-0-download/6018/1 "2021-02-07T21:28:44Z")
@richard or whoever can help me, how do you download a game to a raspberry pi 0 ---
**Author:** ![richard](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/richard/32/5417_2.png) [@richard](https://forum.makecode.com/u/richard)\ **Post date:** [February 8, 2021, 7:50pm UTC](https://forum.makecode.com/t/help-with-raspberry-pi-0-download/6018/2 "2021-02-08T19:50:23Z")
You need to setup the raspberry pi by installing a new OS. Here are the Adafruit instructions for doing so: > **[MakeCode Arcade with Raspberry Pi Zero](https://learn.adafruit.com/makecode-arcade-with-raspberry-pi-zero)** > > This guide explains how to install SD card image to run your MakeCode Arcade games on Pi Zero using either the small Joy Bonnet or a big arcade controls. Or if you’re making you’re own cabinet, you can use this guide: > **[Cardboard Control Panel](https://arcade.makecode.com/hardware/raspberry-pi/cardboard-control-panel)** > > This guide will show you how to make a 2 player Arcade control panel out of just cardboard! > You do not need any special building skills to successfully make your own, let’s do it! ---
**Author:** ![ggiscool](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/ggiscool/32/3431_2.png) [@ggiscool](https://forum.makecode.com/u/ggiscool)\ **Post date:** [February 9, 2021, 12:39am UTC](https://forum.makecode.com/t/help-with-raspberry-pi-0-download/6018/3 "2021-02-09T00:39:34Z")
thank you! ---
**Author:** ![Vegz78](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/vegz78/32/1201_2.png) [@Vegz78](https://forum.makecode.com/u/Vegz78)\ **Post date:** [July 15, 2021, 4:53am UTC](https://forum.makecode.com/t/help-with-raspberry-pi-0-download/6018/4 "2021-07-15T04:53:08Z")
Hi @richard, An observant player of [MC Arcade games on the RPi Zero](https://github.com/Vegz78/McAirpos/issues/5#issuecomment-760950633) discovered that the _/sd/arcade.cfg_ on the Joy Bonnet includes one different scan codes from the regular EV\_KEY buttons that config files for all the other RPi hardware projects have: ```auto JOYSTICK_ADDR=0x48 ``` Could you please elaborate on this?: 1. Does this support EV\_ABS directional joystick/axes controls? 2. How to find the 0x48 address for a controller? 3. Could this, maybe with other address, work for other handheld controller casings than the Joy Bonnet, for instance the [GamePi20](https://www.waveshare.com/wiki/GamePi20)? ---
**Author:** ![richard](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/richard/32/5417_2.png) [@richard](https://forum.makecode.com/u/richard)\ **Post date:** [July 15, 2021, 4:11pm UTC](https://forum.makecode.com/t/help-with-raspberry-pi-0-download/6018/5 "2021-07-15T16:11:25Z")
Ah, this is a question for @mmoskal ---
**Author:** ![mmoskal](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/mmoskal/32/20_2.png) [@mmoskal](https://forum.makecode.com/u/mmoskal)\ **Post date:** [July 15, 2021, 7:11pm UTC](https://forum.makecode.com/t/help-with-raspberry-pi-0-download/6018/6 "2021-07-15T19:11:42Z")
This is i2c device address. Depends on the i2c ADC chip used. This is for direct hardware access not through the /dev/input. ---
**Author:** ![Vegz78](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/vegz78/32/1201_2.png) [@Vegz78](https://forum.makecode.com/u/Vegz78)\ **Post date:** [July 15, 2021, 10:45pm UTC](https://forum.makecode.com/t/help-with-raspberry-pi-0-download/6018/7 "2021-07-15T22:45:15Z")
👍 Thanks!