# Introducing "MakeCode Streamer BETA"
**URL:** https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437
**Category:** Streamer
**Created:** [June 15, 2020, 11:38pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437 "2020-06-15T23:38:22Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 15, 2020, 11:38pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/1 "2020-06-15T23:38:22Z")
**Update: Use the [Live → Streamer](https://forum.makecode.com/c/live/All-about-httpsmakecodecomstreamer/20) category to post comments!**
Hello everyone,
After month of streaming on our mixer channel, we’ve learned quite a few tips and tricks about OBS, scenes, transitions, and other awesome streaming tech. To make everyone benefit from it, we’ve remixed our favorite features into a new tool, **Streamer** , that simplifies the production of coding videos.
**Streamer is in beta phase** and we’d love to hear your feedback! It is already used in the micro:bit and Arcade beginner streams on our [https://mixer.com/makecode](https://mixer.com/makecode) channel.
- try it now for any MakeCode editor **[https://makecode.com/streamer](https://makecode.com/streamer)**
- docs: [https://makecode.com/streamer/docs](https://makecode.com/streamer/docs)
[ ](https://www.youtube.com/watch?v=P59Q0i6Zkrg)
---
### Author:  [@MINTGenie](https://forum.makecode.com/u/MINTGenie)
#### Post date: [June 16, 2020, 10:50am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/2 "2020-06-16T10:50:59Z")
Oh the Streamer is a good mix of a lot of things. Thanks to Makecode team for thinking about it.
Absolutely love the multi-camera/browser/app window integration in a window
I would also like some improvements:
1. undo option in paint mode - for whiteboard style explanations
2. please make the arrow draw backwards - it seems counterintutive and anti-climactic when you want to surprise the user with the arrow. (TaDaa style)
3. Would love to have option to make hardware camera to be bigger than face cam. (I often have some HW mods that i want my students to carefully follow.
4. Can we have the last chat message show up in the button bar or atleast a notification about new msgs flashing for few seconds (with option to disable it - may distract but the point of streaming is to connect with audience)
5. Not a big deal but the settings close button could be a bit more prominent.
These are just my petpeeves otherwise I still love the Streamer!!!
Thanks again.
MINTGenie
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 16, 2020, 2:02pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/3 "2020-06-16T14:02:49Z")
1. right… it’s just a canvas right now; i was planning to put a proper SVG to allow undo and move.
2. ah! i’ve been used to do this way since using Zoom It from sysinternals. i’ll reverse it.
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 16, 2020, 2:56pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/4 "2020-06-16T14:56:46Z")
1. you can swap face/doc cam by clicking on the document cam. I will update the chat view to have one video stream larger than the other.
2. unfortunately, i’m just including mixer as an iframe so I have very limited control ofver the content
3. yeah… the UI work on the settings has been very minimal. you can click on the settings icon again though.
---
### Author:  [@MINTGenie](https://forum.makecode.com/u/MINTGenie)
#### Post date: [June 16, 2020, 3:14pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/5 "2020-06-16T15:14:05Z")
Thanks for the response.
4. for chat notification, may be using the desktop notification is better (unless there is a way for you to integrate the desktop notification into streamer view - just saying :wink :wink )
5. clicking on the settings is cool… did not know.
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 16, 2020, 3:21pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/6 "2020-06-16T15:21:31Z")
1. Right we could query the mixer API to get notified of events but this would defnitely require much more work. I"m wondering if you cannot get this kind of services from existing platforms like OBS or StreamLabs.
In general, you don’t want to show a chat window where you are signed in as the owner because you will see the delete chat message.
2. still that button should stay in the top corner!
---
### Author:  [@MINTGenie](https://forum.makecode.com/u/MINTGenie)
#### Post date: [June 16, 2020, 3:26pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/7 "2020-06-16T15:26:25Z")
I am a noob to streaming… have to still figure out available options in OBS…
---
### Author:  [@SPerkins25](https://forum.makecode.com/u/SPerkins25)
#### Post date: [June 16, 2020, 4:02pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/8 "2020-06-16T16:02:19Z")
I used it today to film some tutorials for my students. Really enjoyed using it. All very intuitive.
I noticed a bug with the simulator not updating to new blocks placed as often as it usually does. This lead to some situations where I went to demo what a block did only for it to not work. Even pressing reset on the simulator wouldn’t update to newly added blocks. Dragging and dropping stuff until I saw the simulator update worked.
---
### Author:  [@richard](https://forum.makecode.com/u/richard)
#### Post date: [June 16, 2020, 4:46pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/9 "2020-06-16T16:46:02Z")
@SPerkins25 yeah, that’s a bug. we’re looking into it!
---
### Author:  [@WeCodeMakeCode](https://forum.makecode.com/u/WeCodeMakeCode)
#### Post date: [June 16, 2020, 7:37pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/10 "2020-06-16T19:37:19Z")
Terrific idea. This will make causal streaming or making videos much easer. Having used it to plan my mixer show for tomorrow, I wanted the following:
1. Arcade Beta as Editor option
2. In the counter background, allow editor to be in background to enable teaser for next show
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 16, 2020, 8:15pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/11 "2020-06-16T20:15:11Z")
1. it is already using the beta. do you want to use the released version?
2. you want to display a full screen game? do you want it zoomed it to fill the viewport? e.g. scale the arcade game and hide the chrome?
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 16, 2020, 9:47pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/12 "2020-06-16T21:47:27Z")
@WeCodeMakeCode go to settings and you’ll find an option under “Countdown” to show the editor as a background. Tell me what you thing.
---
### Author:  [@WeCodeMakeCode](https://forum.makecode.com/u/WeCodeMakeCode)
#### Post date: [June 17, 2020, 12:03am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/13 "2020-06-17T00:03:23Z")
Thanks. I like it, but not so sure about the blurred editor image.
Also, I wish it would automatically disappear the countdown when it reaches zero.
---
### Author:  [@WeCodeMakeCode](https://forum.makecode.com/u/WeCodeMakeCode)
#### Post date: [June 17, 2020, 12:09am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/14 "2020-06-17T00:09:39Z")
I am happy with beta as it is giving me fewer problems than the released version.
I don’t think I need full screen game.
When I turn off the face camera in settings, it still displays the box with black in it.
This thing is really fun.
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 17, 2020, 12:19am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/15 "2020-06-17T00:19:52Z")
It currently always displays the face camera. Is it the document cam showing black?
I added the blur to prevent stealing too much focus but I can make it optional.
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 17, 2020, 5:25am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/16 "2020-06-17T05:25:15Z")
Added a checkbox to turn on/off blurring.
---
### Author:  [@jazzy](https://forum.makecode.com/u/jazzy)
#### Post date: [June 17, 2020, 11:45am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/17 "2020-06-17T11:45:02Z")
Hmm all I see is a browser window with three empty frames when I go to [https://makecode.com/streamer](https://makecode.com/streamer). Am I missing something fundamental here? Thanks.
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 17, 2020, 2:26pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/18 "2020-06-17T14:26:19Z")
What browser are using? Looks like it crashed for you.
---
### Author:  [@peli](https://forum.makecode.com/u/peli)
#### Post date: [June 17, 2020, 2:29pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/19 "2020-06-17T14:29:05Z")
It should look like this:
---
### Author:  [@SPerkins25](https://forum.makecode.com/u/SPerkins25)
#### Post date: [June 17, 2020, 2:50pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/20 "2020-06-17T14:50:30Z")
Yeah that was my first experience as well. Using Chrome. I think I just needed to allow access to my webcam and refresh.
[Next page](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437.md?page=2)