# Introducing "MakeCode Streamer BETA" **URL:** \ **Category:** Streamer\ **Created:** [June 15, 2020, 11:38pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437 "2020-06-15T23:38:22Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![jazzy](https://avatars.discourse-cdn.com/v4/letter/j/58956e/32.png) [@jazzy](https://forum.makecode.com/u/jazzy)\ **Post date:** [June 17, 2020, 3:21pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/21 "2020-06-17T15:21:50Z")
Thanks, peli - newest Edge, and newest Chrome, this happens in both: ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/2/2c1c5cff865c0728d9da885c66341b4859c351cb.png) ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 17, 2020, 3:37pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/22 "2020-06-17T15:37:16Z")
Could press F12 and copy the content of the javascript console? ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 17, 2020, 3:37pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/23 "2020-06-17T15:37:43Z")
Yes on the first load, you will get the allow webcam access on the upper right. A bit surprising… ---
**Author:** ![WeCodeMakeCode](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/wecodemakecode/32/196_2.png) [@WeCodeMakeCode](https://forum.makecode.com/u/WeCodeMakeCode)\ **Post date:** [June 17, 2020, 3:43pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/24 "2020-06-17T15:43:32Z")
Turns out I like the full screen option. With it I can switch more easily between the editor and GitHub ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 17, 2020, 3:44pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/25 "2020-06-17T15:44:16Z")
I made the toolbox “self-hide” so that it’s mostly not visible unless you use it. ---
**Author:** ![darzu](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/darzu/32/1882_2.png) [@darzu](https://forum.makecode.com/u/darzu)\ **Post date:** [June 17, 2020, 7:16pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/26 "2020-06-17T19:16:15Z")
Thanks for the full-screen option! It’s perfect. Love the hover hiding bar. One small thing: could I customize the color of the border? The orange on orange looks a little weird: ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/3/35d45a429677fd6a12954a07a26c08d0c00cfb9e.jpeg) Also, when I go full screen in my browser, it doesn’t seem to resize fully: ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/9/9b16e29fceaae83680edd79922861142ff7f39a9.jpeg) ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 17, 2020, 8:06pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/27 "2020-06-17T20:06:47Z")
@darzu i’ve added settings to pick the colors of boxes/background. Also, the editor should now resize to the full screen. You want to stay close to 16:9 form factor because the other boxes will look off otherwise. ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 17, 2020, 10:00pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/28 "2020-06-17T22:00:00Z")
Shaders are fun. ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/2/221cf2ab14383c4aba3066097ca70865c9d8cc65.jpeg) ---
**Author:** ![jazzy](https://avatars.discourse-cdn.com/v4/letter/j/58956e/32.png) [@jazzy](https://forum.makecode.com/u/jazzy)\ **Post date:** [June 17, 2020, 10:21pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/30 "2020-06-17T22:21:47Z")
@peli, this is what I get in both Chrome and Edge DevTools failed to load SourceMap: Could not parse content for [https://pxt.azureedge.net/blob/dd22520c096be24e7432f5b46e8aad59711f31f0/doccdn/ai.0.js.map:](https://pxt.azureedge.net/blob/dd22520c096be24e7432f5b46e8aad59711f31f0/doccdn/ai.0.js.map:) Unexpected token ; in JSON at position 12 ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 17, 2020, 11:10pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/31 "2020-06-17T23:10:45Z")
Did you block the camera by any chance? You can click on the camera icon on the top right ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/5/5261289092c239804ba2908b9d3d86bf6f524a6b.png) ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 18, 2020, 5:46am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/32 "2020-06-18T05:46:04Z")
Better arrows, and dedicated thumbnail view ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/a/a4fcc022638e6e0f3a78d992c5430b6c672090d7.jpeg) ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 18, 2020, 5:54am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/33 "2020-06-18T05:54:02Z")
More testing ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/f/f0fcfc5df0c51f062621456f8eacfd00ff2f3f6c.jpeg) ---
**Author:** ![jazzy](https://avatars.discourse-cdn.com/v4/letter/j/58956e/32.png) [@jazzy](https://forum.makecode.com/u/jazzy)\ **Post date:** [June 18, 2020, 7:07am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/34 "2020-06-18T07:07:11Z")
OK folks, this happens only in non-anonymous browsing (incognito/inprivate mode) in both browsers. It works in anonymous modes in Chrome and Edge. ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 18, 2020, 11:00am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/35 "2020-06-18T11:00:02Z")
I’m surprised not to see more info in your console output. The error output you showed is benign - there should be a crash somewhere. ---
**Author:** ![SPerkins25](https://avatars.discourse-cdn.com/v4/letter/s/bbce88/32.png) [@SPerkins25](https://forum.makecode.com/u/SPerkins25)\ **Post date:** [June 18, 2020, 11:21am UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/36 "2020-06-18T11:21:20Z")
I get the same issue as Jazzy. The way I get it to load is to close any additional windows/tabs. Works fine if it’s the only tab open. (Which is why I guess going incognito fixes it) Edit. It wasn’t that. It sometimes loads, most times just three white boxes. ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 18, 2020, 12:20pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/37 "2020-06-18T12:20:56Z")
Could you try pressing F12, F5 and copy the output of the console? Is there any error showing up? ---
**Author:** ![SPerkins25](https://avatars.discourse-cdn.com/v4/letter/s/bbce88/32.png) [@SPerkins25](https://forum.makecode.com/u/SPerkins25)\ **Post date:** [June 18, 2020, 1:32pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/38 "2020-06-18T13:32:34Z")
when it doesn’t load I get: ```auto "DevTools failed to load SourceMap: Could not parse content for https://pxt.azureedge.net/blob/dd22520c096be24e7432f5b46e8aad59711f31f0/doccdn/ai.0.js.map: Unexpected token ; in JSON at position 12" ``` When it does load I get: ```auto trying device bbb195fba927b3276c434911bf7f0aed91b018be7e36ac5572cce2dd36b005d3 undefined:1 GET https://makecode.com/undefined net::ERR_ABORTED 404 (Not Found) DevTools failed to load SourceMap: Could not parse content for https://pxt.azureedge.net/blob/dd22520c096be24e7432f5b46e8aad59711f31f0/doccdn/ai.0.js.map: Unexpected token ; in JSON at position 12 [Deprecation] Application Cache API manifest selection is deprecated and will be removed in M82, around May 2020. See https://www.chromestatus.com/features/6192449487634432 for more details. pxtapp.js:1 Browser: chrome 83.0.4103.106 on windows pxtapp.js:1 PouchDB adapter: idb script.js:687 face cam started 2undefined:1 GET https://makecode.com/undefined 404 (Not Found) ``` ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 18, 2020, 2:15pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/39 "2020-06-18T14:15:37Z")
@SPerkins25 @jazzy could you try to reload in the browser that does not work? I have added error tracking and hopefully i’ll be able to see the crash in my logs. ---
**Author:** ![jazzy](https://avatars.discourse-cdn.com/v4/letter/j/58956e/32.png) [@jazzy](https://forum.makecode.com/u/jazzy)\ **Post date:** [June 18, 2020, 2:29pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/40 "2020-06-18T14:29:52Z")
just did once in each Chrome and Edge browsers, producing the “empty frames” result. ---
**Author:** ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)\ **Post date:** [June 18, 2020, 2:45pm UTC](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437/41 "2020-06-18T14:45:03Z")
Snap no dice on the log data. Could you export the HAR session after loading streamer and send it to [jhalleux@microsoft.com](mailto:jhalleux@microsoft.com)? You’ll find the button in the network tabs in the developer tools. ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/e/ee50dd8dfe891fc995683b575d7af96e94ffacf8.png) [Previous page](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437.md?page=1) [Next page](https://forum.makecode.com/t/introducing-makecode-streamer-beta/2437.md?page=3)