# ItsyBitsy M4 compadible lcd?
**URL:** https://forum.makecode.com/t/itsybitsy-m4-compadible-lcd/1226
**Category:** Arcade
**Created:** [February 18, 2020, 7:45am UTC](https://forum.makecode.com/t/itsybitsy-m4-compadible-lcd/1226 "2020-02-18T07:45:48Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@Sirbull](https://forum.makecode.com/u/Sirbull)
#### Post date: [February 18, 2020, 7:45am UTC](https://forum.makecode.com/t/itsybitsy-m4-compadible-lcd/1226/1 "2020-02-18T07:45:48Z")
Hi! I’m trying to make my own arcade handheld and have bought an Adafruit ItsyBitsy m4 board. The guide from adafruit uses an Adafruit 1.8" 128x160 display for about 20$, but I’m wondering if there are other (cheaper) LCDs out there that is compadible? I haven’t found any with the same pinout. Will this be an issue? If not, how do I make it work. #n00b 😉
---
### Author:  [@3issa](https://forum.makecode.com/u/3issa)
#### Post date: [February 18, 2020, 6:14pm UTC](https://forum.makecode.com/t/itsybitsy-m4-compadible-lcd/1226/2 "2020-02-18T18:14:32Z")
Hi!
I use this one : [https://www.aliexpress.com/item/32843115817.html?spm=a2g0s.9042311.0.0.143e4c4dAMpo1J](https://www.aliexpress.com/item/32843115817.html?spm=a2g0s.9042311.0.0.143e4c4dAMpo1J)
Works fine.
---
### Author:  [@Sirbull](https://forum.makecode.com/u/Sirbull)
#### Post date: [February 18, 2020, 6:31pm UTC](https://forum.makecode.com/t/itsybitsy-m4-compadible-lcd/1226/3 "2020-02-18T18:31:03Z")
Nice! How is it with the pin out? Do you have to configure anyting, or is it plug & play?
---
### Author:  [@3issa](https://forum.makecode.com/u/3issa)
#### Post date: [February 22, 2020, 2:33pm UTC](https://forum.makecode.com/t/itsybitsy-m4-compadible-lcd/1226/4 "2020-02-22T14:33:50Z")
The pinout is given by the seller webpage. You can follow the adafruit guide with no worries.