# Latest Brick Versions. 1.10E Troubleshooting
**URL:** https://forum.makecode.com/t/latest-brick-versions-1-10e-troubleshooting/1156
**Category:** EV3
**Created:** [February 4, 2020, 4:51am UTC](https://forum.makecode.com/t/latest-brick-versions-1-10e-troubleshooting/1156 "2020-02-04T04:51:06Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@karl.easton](https://forum.makecode.com/u/karl.easton)
#### Post date: [February 4, 2020, 4:51am UTC](https://forum.makecode.com/t/latest-brick-versions-1-10e-troubleshooting/1156/1 "2020-02-04T04:51:07Z")
Sydney calling. Hello world. Lets talk Ev3 Device manager and MakeCode. I can’t get either one of them to upgrade my firmware past V1.09E. MakeCode will not operate without 1.10 E or higher. When I connect up to Device Manager - it tells me i have the latest software and all is well. If I move over to Mindstorms and attempt to update the firmware there…it also tells me i have the latest firmware - 1.09E. So what is the story??? What am I missing here??? Hoping I have just missed something and am happy to be corrected. Fire away. Karl
---
### Author:  [@mkrdroid](https://forum.makecode.com/u/mkrdroid)
#### Post date: [February 8, 2020, 8:30pm UTC](https://forum.makecode.com/t/latest-brick-versions-1-10e-troubleshooting/1156/2 "2020-02-08T20:30:01Z")
I used the Mindstorms software to upgrade to 1.10E since the MakeCode Device Manager was a little flaky for me. Just download the new firmware and then on Mindstorms go to Tools -\> Firmware Update. On the dialog box that comes up click on “Show Details” and then you’ll see a “Browse” button for the path of the firmware. Just point to the 1.10E version and update. Should be done in a few minutes.
---
### Author:  [@karl.easton](https://forum.makecode.com/u/karl.easton)
#### Post date: [February 9, 2020, 2:36am UTC](https://forum.makecode.com/t/latest-brick-versions-1-10e-troubleshooting/1156/3 "2020-02-09T02:36:55Z")
Hi. Yep…all good. Thanks for thoughts. Did exactly that (as you mentioned) and we are up and running. 🙂