# Makecode Arcade Hardware Tester GUI

**URL:** <https://forum.makecode.com/t/makecode-arcade-hardware-tester-gui/27675>\
**Category:** Arcade\
**Created:** [March 13, 2024, 12:14am UTC](https://forum.makecode.com/t/makecode-arcade-hardware-tester-gui/27675 "2024-03-13T00:14:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![frandev](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/frandev/32/27644_2.png) [@frandev](https://forum.makecode.com/u/frandev)\
**Post date:** [March 13, 2024, 12:14am UTC](https://forum.makecode.com/t/makecode-arcade-hardware-tester-gui/27675/1 "2024-03-13T00:14:55Z")

</div>

# I’m making a program to test your hardware’s functions, with a nice and clear interface.

I need **ALL** the functions that Makecode Arcade supports, such as radio broadcast, 20-pin board support, haptics, motion controls, and others.

# To the @MakeCode team:

Please list the “functions” in the replies, it’d be very helpful.  
Thank you for your attention. I’ll upload it here whenever it’s ready!

---

<div class="post-metadata">

**Author:** ![randomuser](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/randomuser/32/32505_2.png) [@randomuser](https://forum.makecode.com/u/randomuser)\
**Post date:** [March 13, 2024, 6:18pm UTC](https://forum.makecode.com/t/makecode-arcade-hardware-tester-gui/27675/2 "2024-03-13T18:18:10Z")

</div>

I’m hoping you get a reply! 🤞

---

<div class="post-metadata">

**Author:** ![frandev](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/frandev/32/27644_2.png) [@frandev](https://forum.makecode.com/u/frandev)\
**Post date:** [April 2, 2024, 9:08pm UTC](https://forum.makecode.com/t/makecode-arcade-hardware-tester-gui/27675/3 "2024-04-02T21:08:40Z")

</div>

I don’t think that’s gonna happen, sadly.