# MakeCode for nRF52840?

**URL:** <https://forum.makecode.com/t/makecode-for-nrf52840/1164>\
**Category:** Maker\
**Created:** [February 5, 2020, 10:58pm UTC](https://forum.makecode.com/t/makecode-for-nrf52840/1164 "2020-02-05T22:58:34Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![204maker](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/204maker/32/447_2.png) [@204maker](https://forum.makecode.com/u/204maker)\
**Post date:** [May 2, 2020, 11:42pm UTC](https://forum.makecode.com/t/makecode-for-nrf52840/1164/19 "2020-05-02T23:42:36Z")

</div>

I’m getting this error today with no display on the ILI9341 3.2" LCD.  
The experiment mode was enabled on [MakeCode Arcade BETA](https://arcade.makecode.com/beta#).

![Falling Duck error](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/1X/55d628a76e4bfd9ca3839923e1859e24f5ecbb11.png)

Here’s the [UF2 patch](https://pastebin.com/PHgeewjg) I used.  
The patch was created using the hex to UF2 Python conversion script found on [Adafruit’s nRF52840 repo](https://github.com/adafruit/Adafruit_nRF52_Bootloader).  
The display config was modified for the 320x240 ILI9341 LCD.

---

_[View the full topic](https://forum.makecode.com/t/makecode-for-nrf52840/1164)._
