# Makecode support for esp32

**URL:** https://forum.makecode.com/t/makecode-support-for-esp32/1739
**Category:** Maker
**Created:** [April 18, 2020, 4:18pm UTC](https://forum.makecode.com/t/makecode-support-for-esp32/1739 "2020-04-18T16:18:13Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![antonymsuresh](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@antonymsuresh](https://forum.makecode.com/u/antonymsuresh)
#### Post date: [April 18, 2020, 4:18pm UTC](https://forum.makecode.com/t/makecode-support-for-esp32/1739/1 "2020-04-18T16:18:13Z")

</div>

Does MakeCode supports esp32 boards

---

<div class="post-metadata">

### Author: ![peli](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/peli/32/12_2.png) [@peli](https://forum.makecode.com/u/peli)
#### Post date: [April 18, 2020, 5:15pm UTC](https://forum.makecode.com/t/makecode-support-for-esp32/1739/2 "2020-04-18T17:15:10Z")

</div>

No support is planned at the moment.

---

<div class="post-metadata">

### Author: ![FuHu-QC](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/fuhu-qc/32/4830_2.png) [@FuHu-QC](https://forum.makecode.com/u/FuHu-QC)
#### Post date: [August 18, 2021, 1:45pm UTC](https://forum.makecode.com/t/makecode-support-for-esp32/1739/3 "2021-08-18T13:45:54Z")

</div>

Hi Peli,

I found the latest merged PR added ESP32 and ESP32-S2 support.

> <https://github.com/microsoft/pxt-maker/pull/347>

I edited a Makecode program on [maker.makecode.com](http://maker.makecode.com). then, I selected the target board of Espressif ESP32 Devkit-C. I finally clicked download to get a “.bin” file and programmed it into the board. It seems no results at all! Is there anything I missed?

---

<div class="post-metadata">

### Author: ![jigneshk5](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/jigneshk5/32/6677_2.png) [@jigneshk5](https://forum.makecode.com/u/jigneshk5)
#### Post date: [August 15, 2022, 9:38pm UTC](https://forum.makecode.com/t/makecode-support-for-esp32/1739/4 "2022-08-15T21:38:48Z")

</div>

Any update on this?

---

<div class="post-metadata">

### Author: ![databot](https://avatars.discourse-cdn.com/v4/letter/d/ee7513/32.png) [@databot](https://forum.makecode.com/u/databot)
#### Post date: [September 2, 2022, 4:28pm UTC](https://forum.makecode.com/t/makecode-support-for-esp32/1739/5 "2022-09-02T16:28:56Z")

</div>

Hi all, I see some activity around ESP32 but can’t find definitive answers. Someone out there must be doing some work I hope!

We are working on integration of MakeCode with our multi-sensor / physical computing device databot™ - hardware details here:

[https://databot.us.com/databot-2-0-basic-training-deep-geek](https://databot.us.com/databot-2-0-basic-training-deep-geek/)

It is based on the ESP32 and my technical team is hitting dead ends and experiencing a lot of trial and error. Are there any open source examples for the ESP32 successfully using a USB port for uploading code? Are there any individuals out there working on ESP32 integration that we can compare notes with?

Thanks in advance.