# Meowbit sensors in block?

**URL:** <https://forum.makecode.com/t/meowbit-sensors-in-block/1360>\
**Category:** Help\
**Created:** [March 9, 2020, 10:15pm UTC](https://forum.makecode.com/t/meowbit-sensors-in-block/1360 "2020-03-09T22:15:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![sh1n0b1wan](https://avatars.discourse-cdn.com/v4/letter/s/7ab992/32.png) [@sh1n0b1wan](https://forum.makecode.com/u/sh1n0b1wan)\
**Post date:** [March 9, 2020, 10:15pm UTC](https://forum.makecode.com/t/meowbit-sensors-in-block/1360/1 "2020-03-09T22:15:54Z")

</div>

Hello folks!  
I’m trying to find a URL or extension in Arcade that will allow me to code input data from the meowbit’s sensors into the game, but I’m having trouble finding anything. I’m sure there must be something that allows access to these inputs via block programming??

---

<div class="post-metadata">

**Author:** ![richard](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/richard/32/5417_2.png) [@richard](https://forum.makecode.com/u/richard)\
**Post date:** [March 9, 2020, 10:22pm UTC](https://forum.makecode.com/t/meowbit-sensors-in-block/1360/2 "2020-03-09T22:22:04Z")

</div>

As a rule, all extra hardware sensors can be accessed by adding the “Controller” extension to your project. Here’s a GIF:

 ![2020-03-09 15.20.17](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/1X/0976c32c27ba2308ef9f66773f6b3289764cf34c.gif)

---

<div class="post-metadata">

**Author:** ![richard](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/richard/32/5417_2.png) [@richard](https://forum.makecode.com/u/richard)\
**Post date:** [March 9, 2020, 10:22pm UTC](https://forum.makecode.com/t/meowbit-sensors-in-block/1360/3 "2020-03-09T22:22:30Z")

</div>

If you want access to the pins, add the “Edge Connector” extension

---

<div class="post-metadata">

**Author:** ![sh1n0b1wan](https://avatars.discourse-cdn.com/v4/letter/s/7ab992/32.png) [@sh1n0b1wan](https://forum.makecode.com/u/sh1n0b1wan)\
**Post date:** [March 9, 2020, 10:24pm UTC](https://forum.makecode.com/t/meowbit-sensors-in-block/1360/4 "2020-03-09T22:24:23Z")

</div>

Thank you Richard! That was exactly what I was looking for.