# Meowbit with breadboard?

**URL:** <https://forum.makecode.com/t/meowbit-with-breadboard/18441>\
**Category:** Arcade\
**Created:** [March 14, 2023, 4:28pm UTC](https://forum.makecode.com/t/meowbit-with-breadboard/18441 "2023-03-14T16:28:15Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![randomuser](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/randomuser/32/32505_2.png) [@randomuser](https://forum.makecode.com/u/randomuser)\
**Post date:** [March 14, 2023, 4:28pm UTC](https://forum.makecode.com/t/meowbit-with-breadboard/18441/1 "2023-03-14T16:28:15Z")

</div>

I’ve seen plenty of ways online to use a breadboard with a micro:bit, but I was wondering if there is any for Meowbit! I can only connect 1 servo to the meowbit currently, and a breadboard would expand that tons.

---

<div class="post-metadata">

**Author:** ![AqeeAqee](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/aqeeaqee/32/5424_2.png) [@AqeeAqee](https://forum.makecode.com/u/AqeeAqee)\
**Post date:** [March 21, 2023, 7:40pm UTC](https://forum.makecode.com/t/meowbit-with-breadboard/18441/2 "2023-03-21T19:40:26Z")

</div>

Meowbit golden fingers campatible with micro:bit, so all micro:bit edge connector can do  
like this:

 ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/f/f7c888c27507bb73b5f62a2c31117c98b09f43d1.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/8/86660557c6d4377e8fe2d90372d344203916f0ae.jpeg)

---

<div class="post-metadata">

**Author:** ![randomuser](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/randomuser/32/32505_2.png) [@randomuser](https://forum.makecode.com/u/randomuser)\
**Post date:** [March 21, 2023, 9:31pm UTC](https://forum.makecode.com/t/meowbit-with-breadboard/18441/3 "2023-03-21T21:31:18Z")

</div>

Cool! Do you need any extension to use it?

---

<div class="post-metadata">

**Author:** ![AqeeAqee](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/aqeeaqee/32/5424_2.png) [@AqeeAqee](https://forum.makecode.com/u/AqeeAqee)\
**Post date:** [March 21, 2023, 10:11pm UTC](https://forum.makecode.com/t/meowbit-with-breadboard/18441/4 "2023-03-21T22:11:51Z")

</div>

Basicly just the edge-connector  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/e/e800af378ef5c2cc43eece73d57e202af8abe0dd.png)

Plus other extension depents on what kind of your hardware is.

---

<div class="post-metadata">

**Author:** ![randomuser](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/randomuser/32/32505_2.png) [@randomuser](https://forum.makecode.com/u/randomuser)\
**Post date:** [March 21, 2023, 10:48pm UTC](https://forum.makecode.com/t/meowbit-with-breadboard/18441/5 "2023-03-21T22:48:19Z")

</div>

Cool this helps a lot! I’ll send another message once I find one that works, just incase any future-people have the same question.