# Micro:bit tutorial oops error **URL:** \ **Category:** micro:bit\ **Tags:** extension\ **Created:** [July 14, 2022, 2:32am UTC](https://forum.makecode.com/t/micro-bit-tutorial-oops-error/14434 "2022-07-14T02:32:20Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![EarthEdSTEM](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/earthedstem/32/6498_2.png) [@EarthEdSTEM](https://forum.makecode.com/u/EarthEdSTEM)\ **Post date:** [July 14, 2022, 2:32am UTC](https://forum.makecode.com/t/micro-bit-tutorial-oops-error/14434/1 "2022-07-14T02:32:20Z")
HI. I am building tutorials for my students but have been receiving the check internet error when trying to test it using preview. I have searched the forum and checked graphics links etc as suggested. The .md files work in the tutorial tool, though I have noticed that the GitHub page isn’t rendering the blocks correctly. I added the render script to each .md trying to fix this. I have tried opening a new file in Incognito, loading as extension, the tutorial loads but doesn’t begin. When I exit and reopen the file, I get a file can’t load error. I was hoping that someone might cast their eye over what I have done and see if there is something I have missed. [https://makecode.microbit.org/#tutorial:github:earthedstem/earthed-iot-programs-tutorials/README](https://makecode.microbit.org/#tutorial:github:earthedstem/earthed-iot-programs-tutorials/README) [https://earthedstem.github.io/earthed-iot-programs-tutorials/](https://earthedstem.github.io/earthed-iot-programs-tutorials/) Thanks, Snibo ---
**Author:** ![jwunderl](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/jwunderl/32/5308_2.png) [@jwunderl](https://forum.makecode.com/u/jwunderl)\ **Post date:** [July 14, 2022, 5:35pm UTC](https://forum.makecode.com/t/micro-bit-tutorial-oops-error/14434/2 "2022-07-14T17:35:04Z")
It looks like the issue is that you’re pointing at the readme, which is definitely not a tutorial – note the last bit of the url you posted, vs this one that links to a random tutorial from that repo: `https://makecode.microbit.org/#tutorial:github:earthedstem/earthed-iot-programs-tutorials/T_Connect` > **[Microsoft MakeCode for micro:bit](https://makecode.microbit.org/#tutorial:github:earthedstem/earthed-iot-programs-tutorials/T_Connect)** > > A Blocks / JavaScript code editor for the micro:bit powered by Microsoft MakeCode. (that said, it’s definitely a bad error experience / we should take a look at that.) ---
**Author:** ![EarthEdSTEM](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/earthedstem/32/6498_2.png) [@EarthEdSTEM](https://forum.makecode.com/u/EarthEdSTEM)\ **Post date:** [July 15, 2022, 4:35pm UTC](https://forum.makecode.com/t/micro-bit-tutorial-oops-error/14434/3 "2022-07-15T16:35:44Z")
Thanks for the response - made a huge difference. I see the error I made with the links. My goal was to have a menu appear when a student begins the tutorial so that they can go direct to the sensor they want to use. Since there doesn’t seem to be a way to do this such as anchor links, I thought I might be able to use the readme to house links to other md files. Snibo ---
**Author:** ![jwunderl](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/jwunderl/32/5308_2.png) [@jwunderl](https://forum.makecode.com/u/jwunderl)\ **Post date:** [July 15, 2022, 4:54pm UTC](https://forum.makecode.com/t/micro-bit-tutorial-oops-error/14434/4 "2022-07-15T16:54:24Z")
Hm, I see – there are some formatting differences in the readme that were causing it to not work, but I see that you got it working as you intended as the readme link looks like it is working as you described now. As a quick aside, it looks like you have a ````blocks` solely to get past the tutorial parser – if you don’t want that forever to show up you can set it as a ````ghost` snippet instead of a blocks one. This will still get past the tutorial parser & that way it will not show up on the modal itself: ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/0/0f028ca2b54a7704a0fee9076b805e7892030181.png) ````auto ```ghost basic.forever(function () { }) ``` ```` ---
**Author:** ![EarthEdSTEM](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/earthedstem/32/6498_2.png) [@EarthEdSTEM](https://forum.makecode.com/u/EarthEdSTEM)\ **Post date:** [July 18, 2022, 4:01pm UTC](https://forum.makecode.com/t/micro-bit-tutorial-oops-error/14434/5 "2022-07-18T16:01:46Z")
Thanks for the tip. It’s still clumsy. I would have liked to have stayed within a single tutorial file, but without anchor links, students would have to navigate all the way through to find the sensor they want. I am starting to think that creating a webpage with links to each tutorial might be better than the menu format I have now. I am still working through the LED tutorial, trying to find why it isn’t working. It’s been fun to figure out though. Snibbo