# Microbit remote control car right and left turn inconsistent

**URL:** <https://forum.makecode.com/t/microbit-remote-control-car-right-and-left-turn-inconsistent/17149>\
**Category:** Global MakeCode Arcade Game Jam\
**Created:** [December 30, 2022, 5:56pm UTC](https://forum.makecode.com/t/microbit-remote-control-car-right-and-left-turn-inconsistent/17149 "2022-12-30T17:56:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nat](https://avatars.discourse-cdn.com/v4/letter/n/8c91f0/32.png) [@Nat](https://forum.makecode.com/u/Nat)\
**Post date:** [December 30, 2022, 5:56pm UTC](https://forum.makecode.com/t/microbit-remote-control-car-right-and-left-turn-inconsistent/17149/1 "2022-12-30T17:56:05Z")

</div>

I have made a remote control car for the microbit. I have attached two continuous servo motors and I use pin 0 and pin 1 to control the motors. I have piggybacked the 3v and gnd with 2 alligator clips on each (see image). I have code for the transmitter and the receiver. All of my code works perfectly except for right and left turn which mainly only seems to work if I shake to stop the car and then right and left work, where as I do not have to shake for forwards(a and b) and backwards (touch gold logo) work whenever I press the appropriate buttons. I want a and b to work whenever I touch a or b without having to shake in between. Here are the 2 separate codes.

Receiver code

 ![image](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/2/203306e8cc277160da4d3fff8e727c72414b6a81.jpeg)

> **[Reciever code test](https://makecode.microbit.org/59892-21573-49953-03844)**
>
> Made with ❤️ in Microsoft MakeCode for micro:bit.

Transmitter code

> **[testTransmitter](https://makecode.microbit.org/81460-47866-62320-56482)**
>
> Made with ❤️ in Microsoft MakeCode for micro:bit.

---

<div class="post-metadata">

**Author:** ![PixelDoodle](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/pixeldoodle/32/24129_2.png) [@PixelDoodle](https://forum.makecode.com/u/PixelDoodle)\
**Post date:** [January 3, 2023, 5:54pm UTC](https://forum.makecode.com/t/microbit-remote-control-car-right-and-left-turn-inconsistent/17149/2 "2023-01-03T17:54:12Z")

</div>

I recommend You Put this in the Meow-Bit Category.

---

<div class="post-metadata">

**Author:** ![PixelDoodle](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/pixeldoodle/32/24129_2.png) [@PixelDoodle](https://forum.makecode.com/u/PixelDoodle)\
**Post date:** [January 3, 2023, 6:18pm UTC](https://forum.makecode.com/t/microbit-remote-control-car-right-and-left-turn-inconsistent/17149/3 "2023-01-03T18:18:38Z")

</div>

Not Meow-Bit. Microbit Sorry