# MicroBit Servo Control

**URL:** <https://forum.makecode.com/t/microbit-servo-control/8933>\
**Category:** Adafruit Circuit Playground Express\
**Created:** [June 27, 2021, 6:29am UTC](https://forum.makecode.com/t/microbit-servo-control/8933 "2021-06-27T06:29:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![quinsworth](https://avatars.discourse-cdn.com/v4/letter/q/a87d85/32.png) [@quinsworth](https://forum.makecode.com/u/quinsworth)\
**Post date:** [June 27, 2021, 6:29am UTC](https://forum.makecode.com/t/microbit-servo-control/8933/1 "2021-06-27T06:29:35Z")

</div>

I’m looking to control two S3003 servo motors with a Microbit. Can anyone recommend some guidance or resources to show me how. Iv tried wiring the VCC and ground directly to the motor and the signal to the MicroBit but no luck.

---

<div class="post-metadata">

**Author:** ![dsssssssss9](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/dsssssssss9/32/861_2.png) [@dsssssssss9](https://forum.makecode.com/u/dsssssssss9)\
**Post date:** [June 27, 2021, 7:43am UTC](https://forum.makecode.com/t/microbit-servo-control/8933/2 "2021-06-27T07:43:41Z")

</div>

Hi

Hope this helps?

> **[Using The BBC micro:bit To Control A Servo](https://kitronik.co.uk/blogs/resources/using-bbc-microbit-control-servo)**
>
> Learn what the servo motor pin connections do, how to connect them to a BBC micro:bit and then code the microbit to control the position of the servo arm.

> **[Using a servo with the micro:bit](https://support.microbit.org/support/solutions/articles/19000101864-using-a-servo-with-the-micro-bit)**
>
> Overview This article explains how to connect a servo motor to the micro:bit and how to code it in the micro:bit editors. It also provides some troubleshooting and further information on use. Contents Connecting a servo Programming a...