# Music speaker Arcade Edge connector ?

**URL:** <https://forum.makecode.com/t/music-speaker-arcade-edge-connector/7098>\
**Category:** Help\
**Created:** [March 30, 2021, 3:22pm UTC](https://forum.makecode.com/t/music-speaker-arcade-edge-connector/7098 "2021-03-30T15:22:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![frank\_schmidt](https://avatars.discourse-cdn.com/v4/letter/f/7993a0/32.png) [@frank\_schmidt](https://forum.makecode.com/u/frank_schmidt)\
**Post date:** [March 30, 2021, 3:22pm UTC](https://forum.makecode.com/t/music-speaker-arcade-edge-connector/7098/1 "2021-03-30T15:22:46Z")

</div>

I have no problem using pin 0 with Microbit to output music sounds to a speaker on a breadboard, 8 Ohm ;1/2 watt. So what’s the trick to do the same with edge connected Arcade console (Meowbit) ? If I include the command: on A button press, Analog write P0 to1023; then I do hear a click on A button press from Meowbit to speaker so I know there is a connection. How do I add music to speaker ? Thanks.