# Raspberry Pi 5 Batocera and MakeCode **URL:** \ **Category:** Help\ **Created:** [April 13, 2026, 10:24pm UTC](https://forum.makecode.com/t/raspberry-pi-5-batocera-and-makecode/43306 "2026-04-13T22:24:56Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![yourbassplayer](https://avatars.discourse-cdn.com/v4/letter/y/a9a28c/32.png) [@yourbassplayer](https://forum.makecode.com/u/yourbassplayer)\ **Post date:** [April 13, 2026, 10:24pm UTC](https://forum.makecode.com/t/raspberry-pi-5-batocera-and-makecode/43306/1 "2026-04-13T22:24:56Z")
Hey all, I am an educator that has been trying to get an arcade cabinet up and running, for my CS students. I got a Raspberry Pi 5 and am trying to get Batocera to let me use the McAirpos thing and I just can’t get them to execute in the interface. They just kick me out. I am kind of at my wit’s end and would love any help that anyone can offer. ---
**Author:** ![Jedi](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/jedi/32/14307_2.png) [@Jedi](https://forum.makecode.com/u/Jedi)\ **Post date:** [April 13, 2026, 11:02pm UTC](https://forum.makecode.com/t/raspberry-pi-5-batocera-and-makecode/43306/2 "2026-04-13T23:02:22Z")
you can use the makecode arcade kiosk instead! it has a much nicer menu and its easier to add games, plus it runs right in your browser so you can just make raspberry pi os directly boot into the webpage! ---
**Author:** ![NeverStopTheCoder](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/neverstopthecoder/32/21194_2.png) [@NeverStopTheCoder](https://forum.makecode.com/u/NeverStopTheCoder)\ **Post date:** [April 14, 2026, 4:26pm UTC](https://forum.makecode.com/t/raspberry-pi-5-batocera-and-makecode/43306/3 "2026-04-14T16:26:55Z")
if you want the game to run directly from the sd card I can help with that I was able to do it check out **[Make code game on raspberry pi 5!](https://forum.makecode.com/t/make-code-game-on-raspberry-pi-5/42555)** ---
**Author:** ![Solek](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/solek/32/29692_2.png) [@Solek](https://forum.makecode.com/u/Solek)\ **Post date:** [April 14, 2026, 4:30pm UTC](https://forum.makecode.com/t/raspberry-pi-5-batocera-and-makecode/43306/4 "2026-04-14T16:30:18Z")
i had this issue on my raspberry pi 3b arcade machine, i cant remember how i fixed it, but they work now. write the steps down here that you used to set it up, if i see the steps you used it might refresh my memory which was the one that got me too