# Read from thingspeak with makecode

**URL:** https://forum.makecode.com/t/read-from-thingspeak-with-makecode/13158
**Category:** Global MakeCode Arcade Game Jam
**Created:** [April 18, 2022, 5:20pm UTC](https://forum.makecode.com/t/read-from-thingspeak-with-makecode/13158 "2022-04-18T17:20:42Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![naim514](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/naim514/32/5634_2.png) [@naim514](https://forum.makecode.com/u/naim514)
#### Post date: [April 18, 2022, 5:20pm UTC](https://forum.makecode.com/t/read-from-thingspeak-with-makecode/13158/1 "2022-04-18T17:20:43Z")

</div>

hi i want to read data from thingspeak using esp 01 connected to microbit but i don´t succeed  
i used different methodes but no one worked  
i think i must use mqtt …  
help please

thx

---

<div class="post-metadata">

### Author: ![UnsignedArduino](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/unsignedarduino/32/592_2.png) [@UnsignedArduino](https://forum.makecode.com/u/UnsignedArduino)
#### Post date: [April 19, 2022, 5:43pm UTC](https://forum.makecode.com/t/read-from-thingspeak-with-makecode/13158/2 "2022-04-19T17:43:59Z")

</div>

You could use AT commands to control an ESP01, and there might be serial commands / blocks for micro:bit.