# Reading analog pins

**URL:** <https://forum.makecode.com/t/reading-analog-pins/806>\
**Category:** Arcade\
**Created:** [November 20, 2019, 11:13pm UTC](https://forum.makecode.com/t/reading-analog-pins/806 "2019-11-20T23:13:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![204maker](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/204maker/32/447_2.png) [@204maker](https://forum.makecode.com/u/204maker)\
**Post date:** [November 20, 2019, 11:13pm UTC](https://forum.makecode.com/t/reading-analog-pins/806/1 "2019-11-20T23:13:07Z")

</div>

I was trying to read from my analog pins on my Itsybitsy M4 arcade but I noticed the pins were missing on the analog read pin block. Where are the **analog pins** on the **analog read pin** block?

 ![reading%20from%20analog%20pins](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/1X/226001990faf4fcf8dec5d66df437786da337920.png)