# Slide Move **URL:** \ **Category:** Arcade\ **Created:** [September 3, 2021, 8:28pm UTC](https://forum.makecode.com/t/slide-move/9873 "2021-09-03T20:28:36Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![AlexZhang](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/alexzhang/32/4320_2.png) [@AlexZhang](https://forum.makecode.com/u/AlexZhang)\ **Post date:** [September 3, 2021, 8:28pm UTC](https://forum.makecode.com/t/slide-move/9873/1 "2021-09-03T20:28:36Z")
> **[slideMove](https://arcade.makecode.com/00284-65115-78016-46263)** > > Made with ❤️ in Microsoft MakeCode Arcade. ![arcade-screenshot](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/7/7127439c3580c5993a0eb92ff2cdccf9cbbbc250.png) We always want to control our sprites smoothly. This is my solution. This method is actually from my scratch coding experience, despite the “ax / ay” and “fx / fy” in Arcade blocks. 🤣 There must be a better way to do it. If you know please share us. Thank you! ---
**Author:** ![UnsignedArduino](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/unsignedarduino/32/592_2.png) [@UnsignedArduino](https://forum.makecode.com/u/UnsignedArduino)\ **Post date:** [September 3, 2021, 10:44pm UTC](https://forum.makecode.com/t/slide-move/9873/2 "2021-09-03T22:44:49Z")
I would do something like this: > **[slideMove](https://arcade.makecode.com/68900-24938-80378-04470)** > > Made with ❤️ in Microsoft MakeCode Arcade. ![arcade-screenshot](https://us1.discourse-cdn.com/flex020/uploads/makecode/original/2X/b/b5bf35228a6e9e6538c0ccd98e36e4b2f08d349a.png) Also really like the sprite 😃 very cute ---
**Author:** ![AlexZhang](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/alexzhang/32/4320_2.png) [@AlexZhang](https://forum.makecode.com/u/AlexZhang)\ **Post date:** [September 4, 2021, 4:38am UTC](https://forum.makecode.com/t/slide-move/9873/3 "2021-09-04T04:38:36Z")
Thanks 😁