# STORAGE module in makecode

**URL:** <https://forum.makecode.com/t/storage-module-in-makecode/1868>\
**Category:** Maker\
**Created:** [April 29, 2020, 6:16am UTC](https://forum.makecode.com/t/storage-module-in-makecode/1868 "2020-04-29T06:16:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![KalbeAbbas](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/kalbeabbas/32/560_2.png) [@KalbeAbbas](https://forum.makecode.com/u/KalbeAbbas)\
**Post date:** [April 29, 2020, 6:16am UTC](https://forum.makecode.com/t/storage-module-in-makecode/1868/1 "2020-04-29T06:16:21Z")

</div>

Hi, I am trying to remove STORAGE module from makecode editor locally. When I removed it from pxt.json, the module disappears from the editor but causing not able to transfer directly with WebUSB. Is it necessary to keep this module to enable WebUSB transfer?

---

<div class="post-metadata">

**Author:** ![suraj022](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/suraj022/32/821_2.png) [@suraj022](https://forum.makecode.com/u/suraj022)\
**Post date:** [April 29, 2020, 5:09pm UTC](https://forum.makecode.com/t/storage-module-in-makecode/1868/2 "2020-04-29T17:09:30Z")

</div>

in your board’s pxt.json just add a yotta config to set DEVICE\_USB to 1

like this.  
`"yotta": { "config": { "DEVICE_USB": 1 } }`

restart your local server and upload the code once through bootloader. it’ll then be deteted by webUSB normally.

---

<div class="post-metadata">

**Author:** ![KalbeAbbas](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/kalbeabbas/32/560_2.png) [@KalbeAbbas](https://forum.makecode.com/u/KalbeAbbas)\
**Post date:** [April 30, 2020, 4:59am UTC](https://forum.makecode.com/t/storage-module-in-makecode/1868/3 "2020-04-30T04:59:56Z")

</div>

Thanks . It worked 🙂