# Support for ESP32-WROOM-32 and Kano Pixel Kit?
**URL:** https://forum.makecode.com/t/support-for-esp32-wroom-32-and-kano-pixel-kit/4774
**Category:** Maker
**Created:** [December 3, 2020, 10:30am UTC](https://forum.makecode.com/t/support-for-esp32-wroom-32-and-kano-pixel-kit/4774 "2020-12-03T10:30:21Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@edubsky](https://forum.makecode.com/u/edubsky)
#### Post date: [December 3, 2020, 10:30am UTC](https://forum.makecode.com/t/support-for-esp32-wroom-32-and-kano-pixel-kit/4774/1 "2020-12-03T10:30:21Z")
Hi folks,
I’ve got a Kano Pixel Kit, which is a super little device, based on an ESP32-WROOM-32, with 128 LEDs, wifi, and buttons and USB ports, and even a battery. It’s pretty cool really.
But Kano don’t support the device any more, and their block-based programming app (Kano App) is buggy, so not much hope there.
I was wondering if anybody else here has had any luck with ESP32-based devices and MakeCode, or could point me to documentation for adding new boards.
---
### Author:  [@edubsky](https://forum.makecode.com/u/edubsky)
#### Post date: [December 11, 2020, 9:26pm UTC](https://forum.makecode.com/t/support-for-esp32-wroom-32-and-kano-pixel-kit/4774/2 "2020-12-11T21:26:10Z")
Some more info about the Pixel Kit, via esptool.py:
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None