# Support Makecode Arcade on Raspberry Pi Pico (RP2040)

**URL:** <https://forum.makecode.com/t/support-makecode-arcade-on-raspberry-pi-pico-rp2040/16115>\
**Category:** Arcade\
**Created:** [October 31, 2022, 5:37pm UTC](https://forum.makecode.com/t/support-makecode-arcade-on-raspberry-pi-pico-rp2040/16115 "2022-10-31T17:37:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vanminh0910](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/vanminh0910/32/7073_2.png) [@vanminh0910](https://forum.makecode.com/u/vanminh0910)\
**Post date:** [October 31, 2022, 5:37pm UTC](https://forum.makecode.com/t/support-makecode-arcade-on-raspberry-pi-pico-rp2040/16115/1 "2022-10-31T17:37:45Z")

</div>

Hi All,

I saw that Raspberry Pi Pico (RP2040) is in the list of MCU supported but there is not reference schematic or GPIO wiring and uf2 firmware for it. Is there anyone has played with it? Thanks.

---

<div class="post-metadata">

**Author:** ![Vegz78](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.makecode.com/vegz78/32/1201_2.png) [@Vegz78](https://forum.makecode.com/u/Vegz78)\
**Post date:** [December 8, 2022, 5:35pm UTC](https://forum.makecode.com/t/support-makecode-arcade-on-raspberry-pi-pico-rp2040/16115/2 "2022-12-08T17:35:01Z")

</div>

Stumbled upon this video not long ago, which shows MakeCode Arcade running on a Pico:

[![](https://img.youtube.com/vi/lNt1WC0PGd4/maxresdefault.jpg "MakeCode Arcade and Pi PICO") ](https://www.youtube.com/watch?v=lNt1WC0PGd4)

If this is real and doable, what a fun challenge for the @makecode team and this community!

What an enormous opportunity and NO chip shortage to go with the RP2040, either, I’ve heard!